Arama Yap Mesaj Submit
Request a Callback
+90
X
X

Select Your Currency

Turkish Lira $ US Dollar Euro
X
X

Select Your Currency

Turkish Lira $ US Dollar Euro

Contact Us

Location Halkali merkez neighborhood fatih st ozgur apt no 46 , Kucukcekmece , Istanbul , 34303 , TR
">

BIOS and UEFI Master Guide 2026 CURRENT

Command the heart of your computer. The most comprehensive and technical guide about BIOS keys, error sounds meanings, UEFI boot settings and server optimizations for all brands. Everything you need to troubleshoot hardware problems and configure performance settings is here.

What are BIOS and UEFI?

BIOS (Basic Input/Output System)is the initial software that is embedded in your computer's microchip and starts the system. It tests (POST) the hardware components (RAM, Processor, Disks) and loads the operating system.

In 2026 year standards, most systems are now UEFI (Unified Extensible Firmware Interface) uses. UEFI is a system that replaces the old BIOS, has a graphical interface, has mouse support and is more secure (Secure Boot).

Important Information: Windows 11 and above operating systems require TPM 2.0 and Secure Boot features to be activated via BIOS/UEFI for installation and security.

BIOS and Boot Menu Keys by Brand

Each motherboard and laptop manufacturer uses different shortcuts to enter the BIOS. In the table below you can find the current key combinations of the most used brands in Türkiye and the world.

Marka BIOS Enter Key Boot Menu Key Notlar
Asus F2 or DEL ESC or F8 Usually press and hold F2 at startup.
Lenovo F2 or Fn + F2 F12 or Novo Key Some models have a small "Novo" button on the side.
HP F10 or ESC F9 It may be necessary to first press ESC and select F10 from the menu.
Dell F2 F12 Press quickly when the Dell logo appears.
Monster F2 F7 Turkish gaming computer brand.
Acer F2 F12 F12 boot menu must be activated in BIOS.
MSI DEL F11 It is common on motherboards and laptops.
Casper/Excalibur F2 F7 or F12 may vary depending on model.
Toshiba F2 F12 -
Samsung F2 F10 -
Sony VAIO ASSIST Key F11 While off, press ASSIST.

Entering the BIOS via Windows 10/11

Due to the fast boot feature, sometimes it may be impossible to reach the keys. In this case, you can enter the BIOS through the operating system:

  1. Ayarlar > Update and Security (or System) > Kurtarma Follow your path.
  2. Advanced Startup Click the "Restart Now" button at the bottom.
  3. The computer will restart with a blue screen.
  4. In order: Troubleshooting > Advanced Options > UEFI Firmware SettingsSelect .
  5. When you say "Restart", the computer will boot directly to the BIOS screen.
Warning: Never disconnect the computer's power while updating the BIOS. If you're using a laptop, make sure the battery is charged and plugged in.

BIOS Error Sounds (Beep Codes) and Their Meanings

Is your computer not turning on and making beeping noises? These sounds indicate hardware malfunctions. Here are the most common AMI and Award BIOS error codes:

Ses Kodu Possible Problem Solution Proposal
1 Short System Normal No problem, the system boots.
2 Short Memory (RAM) Parity Error Remove or replace RAM.
3 Short Memory Read/Write Error Clean RAM slots, try different slots.
5 Short Processor (CPU) Error Check processor, check cooler.
8 Short Video Card Memory Error Check the video card.
1 Long, 2 Short Video Card Error The graphics card may not be seated.
Continuous Sound Power Supply / Overheating Check fans and PSU.

For more detailed information on our website BIOS Error Sounds GuideYou can check out.

Also regarding Windows Blue Screen errors ACPI BIOS Error Solution You can take a look at our article.

BIOS Settings for Server and Virtualization

What you get from Eka Sunucu Dedicated Server or on the servers you have installed yourself, the following settings must be turned on for performance and virtualization (VMware, Proxmox, etc.):

  • Intel VT-x/AMD-V: It is virtualization technology. If you are going to install VDS, it must be "Enabled".
  • Intel VT-d/IOMMU: Required for hardware passthrough (e.g. GPU server).
  • Power Management: It should be set to "High Performance" or "OS Controlled".
  • Hyper-Threading: Virtually doubles the processor cores, usually left open.

Frequently Asked Questions (FAQ)

What setting should I make to format from USB?
Enter BIOS, go to the "Boot" tab. In the "Boot Priority" or "Boot Order" section, your USB memory stick (Usually appears with its brand name) 1. move it to the queue. Save and exit with F10. Also BIOS does not read USB You can look at our guide.
I forgot my BIOS password, how do I reset it?
For desktop computers, unplug the case, remove the round BIOS battery (CR2032) on the motherboard, wait 1 minutes, then plug it back in. This process is more difficult on laptops and technical service may be required.
Does BIOS update improve performance?
Yes, BIOS updates are important, especially for new processors, RAM compatibility and security patches. However, it is not mandatory in a stable operating system. It is a risky transaction.
Top